TP-Link RE615X AX1800 WiFi 6 Range Extender w/Ethernet Port | 1.8G Dual-Band Wireless Repeater Amplifier | Up to 2100 Sq. Ft., 64 Devices | Internet Signal Booster | APP Setup | EasyMesh Compatible
$69.99
Related Products
RE615X – AX1800 Mesh Wi-Fi 6 Range Extender
AX1800 Dual-Band Blazing Wi-Fi
The Dual-Band Wi-Fi with 1024-QAM technology boosts overall speeds up to a super-fast 1800 Mbps.
Get More Range with Your Existing Router
A single router has limited Wi-Fi coverage and always causes Wi-Fi dead zones. RE615X wirelessly connects to your existing router and boosts more Wi-Fi signals throughout your home, allowing you to enjoy smooth Wi-Fi 6 network experiences everywhere with great speed, capacity, and coverage.
EasyMeshTM
EasyMeshTM works as a whole home Wi-Fi solution between different access points, providing strong, seamless, stable, and scalable wireless connections covering your whole home stable connection. If you already have EasyMeshTM or OneMeshTM devices, you can economically expand your network with TP-Link’s EasyMeshTM router or range extender, without replacing your existing devices.
𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢𝐅𝐢 𝟔 𝐄𝐱𝐭𝐞𝐧𝐝𝐞𝐫 𝐁𝐨𝐨𝐬𝐭𝐞𝐫 𝐰𝐢𝐭𝐡 𝟏.𝟖 𝐆𝐛𝐩𝐬 𝐓𝐨𝐭𝐚𝐥 𝐁𝐚𝐧𝐝𝐰𝐢𝐝𝐭𝐡 – Extend your home network with full speeds of 1201 Mbps (5 GHz) and 574 Mbps (2.4 GHz). Enjoy smoother and more reliable streaming, gaming, downloading with high-performance WiFi 6 range extender RE615X.
𝐌𝐚𝐱𝐢𝐦𝐢𝐳𝐞𝐝 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐮𝐩 𝐭𝐨 𝟐𝟏𝟎𝟎 𝐒𝐪. 𝐅𝐭 – Two high-gain directional antennas with Beamforming technology enhance signal strength, reliability, and range, providing whole-home Wi-Fi coverage and eliminating dead zones for up to 64 devices.
𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 – TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
𝐄𝐚𝐬𝐲𝐌𝐞𝐬𝐡-𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 – Easily expand your network for seamless, whole-home mesh connectivity by connecting the RE615X to any EasyMesh-compatible router.
𝐍𝐨𝐭 𝐓𝐨 𝐢𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐒𝐩𝐞𝐞𝐝 – Please note that all Wireless Extenders are designed to increase or improve WiFi coverage and not to directly increase speed. In some cases improving signal reliability can affect overall throughput.
𝐖𝐢𝐅𝐢 𝐄𝐱𝐭𝐞𝐧𝐝𝐞𝐫 𝐰𝐢𝐭𝐡 𝐆𝐢𝐠𝐚𝐛𝐢𝐭 𝐄𝐭𝐡𝐞𝐫𝐧𝐞𝐭 𝐏𝐨𝐫𝐭 – Experience wired speed and reliability anywhere in your home by connecting your favorite device to the gigabit ethernet port.
𝐒𝐦𝐚𝐫𝐭 𝐀𝐝𝐚𝐩𝐭𝐢𝐯𝐞 𝐑𝐨𝐚𝐦𝐢𝐧𝐠 – Seamlessly move throughout your home with automatic connections to the strongest signal, ensuring uninterrupted coverage and optimal performance.
𝐀𝐜𝐜𝐞𝐬𝐬 𝐏𝐨𝐢𝐧𝐭 (𝐀𝐏) 𝐌𝐨𝐝𝐞 – Easily turn any wired connection into a powerful Wi-Fi hotspot using the Gigabit ethernet port and AP mode.
𝐄𝐚𝐬𝐲 𝐒𝐞𝐭 𝐔𝐩 𝐢𝐧 𝐌𝐢𝐧𝐮𝐭𝐞𝐬 – Easily set up and manage your WiFi in a few quick and easy steps using the TP-Link Tether app (Android, iOS). Find the optimal location for the best WiFi connection with intelligent signal indicator.
𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲 – The AX1800 range extender is compatible with almost all WiFi-enabled devices and routers or access points. It even supports new AX phones, laptops and other devices.
12 reviews for TP-Link RE615X AX1800 WiFi 6 Range Extender w/Ethernet Port | 1.8G Dual-Band Wireless Repeater Amplifier | Up to 2100 Sq. Ft., 64 Devices | Internet Signal Booster | APP Setup | EasyMesh Compatible
Add a review
$69.99
The Stud –
Recommended
This TP-Link AX1800 WiFi 6 Range Extender (RE615X) has been a lifesaver for my home network! I was struggling with weak WiFi signals in certain areas of my house, particularly upstairs and in the backyard. This extender was incredibly easy to set up using the TP-Link Tether app. Seriously, it took just a few minutes, and the app walked me through the whole process.The improvement in coverage is remarkable. I now have strong, reliable WiFi in all the previously dead zones. Streaming video is smooth, and I can finally work from anywhere in the house without worrying about dropped connections. The dual-band WiFi 6 speeds are noticeably faster, making everything feel more responsive.I also appreciate the Ethernet port, which allows me to connect a wired device, like my smart TV, directly to the extender for an even more stable connection. The fact that it can also function as an access point is a bonus, giving me even more flexibility.Another great feature is its compatibility with OneMesh. While I don’t currently have a OneMesh router, it’s good to know that I can easily create a seamless mesh network in the future if I decide to upgrade.Overall, I’m extremely happy with the performance and value of this TP-Link AX1800 Range Extender. It’s a fantastic solution for anyone looking to boost their WiFi signal and eliminate dead zones. Highly recommended!
Almost Famous! –
5 Minute Setup with TP-Link DECO Mesh and DECO App
Appears to be a good value if it lasts long. The AX1800 took 5 minutes to setup with TP-Link Mesh system router and the DECO App. After following the initial plug in and waiting for the AX1800 and the LED light instruction settings; I opened the DECO app on my cell phone and then clicked on more. There I enabled WPS in the app and then pressed the WPS button on the AX1800. The AX1800 unit connected within seconds and was fully functional within a couple of minutes. I have it about 40 feet and behind 3 walls away from the router. The speed is nearly equal to that of the router. Hope this is useful for anyone setting this up with TP DECO Mesh!
colleenesh –
Great wifi extender
Easy install (I used the app). Great coverage. No issues.
HFL –
Great signal strength
Okay, this extender connected right away with my modem/router. It shows up well n the Tether app. Has great signal. But, even though it connects to your existing WiFi router it is basically a separate router. So if you have a device that was connected to your main router and you want to use this device to get a stronger signal you will need to redesignate the new router name that will be created by this extender. You can change the name of the New extender/router to whatever you want. There will be two new devices that will appear on your list of available routers. They will most likely be named the same name as your main router with the suffix of _EXT and _5GEXT, or something like that. You will need to create new or use existing passwords for the during setup. Then, to connect to one of these go through the same process as when connecting to any WiFi. Even though this extender is connected to your main router you don’t use the connect SSID from that router, you use what you have created for this extender.
tdawg –
easy setup and works great!
easy to set up; signal strength is good; range is excellent, I am connecting to my starlink router from my shop. Range is about 150 feet
TopGear –
Must be configured wirelessly without Ethernet cable plugged in!
In my situation, which can’t be the only one, I wanted to extend my signal to another room in my shop. The shop is roughly 80×100 with steel walls deciding the sections.The problem is my main WiFi router wouldn’t get any signal going through the walls to the other room. Even though they were 20ft and 50ft away respectively.So I bought this to hardwire an Ethernet cable from my router to this extender to use the same network signal and essentially have a another WiFi emitting device in another room on the other side of a steel wall to get signal.The problem that you must be aware of is there is absolutely no way to set this up in access point mode UNTIL you have wirelessly connected to your network. I figured I could go into the initial setup and change modes immediately before going through the entire setup process, a process that ONLY works if your extender can connect to your wireless router, connect to it, finalize its settings, reboot to save them, then go back into your setup and finally be able to change modes to “access point” mode.So first point of contention, the device will NOT finish setup (errors and times out) if you have an active ethernet cable attached to it. In my case, that was the signal from one of the lan ports of my router plugging into this extender (remember, no signal through steel walls).So easy enough fix. Simple set the device up next to your existing router, then after finalizing setup, rebooting, changing to AP mode, moving router to its new location, and plugging in Ethernet cable, it works fine.My advice would be to have your team update the drivers / setup to immediately ask, as in the 1st step, the mode someone will be using this device. That would save tons of time and headache as I’m sure many people would use this device hardwired from a long lan port run off their router like I am.After that, seems to work fine and exactly what I was looking for.Just be aware the install instructions don’t exactly give you this info. And above all, if you plan on using the Ethernet port on the extender, DO NOT plug anything into it until AFTER your setup has completed and finalized. I had to do 2 hard resets of the device before I figured out that was what was stopping me from the initial setup as well.Just an FYI….
Michael Molloy –
Works great!
I was worried about buying an extender after reading bad reviews, but I have the Archer AX21 (TP-Link) router and figured the REG615X would possibly be a good match. It is a great match! Setting up was a breeze using Tether app. With the app, I could fine tune the settings. I have a 2100 sq ft two-story house with 10ft ceilings and was getting 100 Mbps upstairs. With the extender, I now get close to 400 Mbps and using a LAN cable to my gaming rig gives me around 650 Mbps. The quality of the unit is as good as the quality of its performance.
Musabbeh Alshamsi –
بدون تقطيع او فقد للاتصال ويستحق الشراء
MiguiOceano –
📝 DESCRIPCIÓNExtensor de red Wifi en modo repetidor y en modo AP (Punto de acceso)En Amazon hay otro modelo de Tp Link más económico: https://amzn.to/3DD77aI🧾 ESPECIFICACIONES- Medidas: 163 x 76.4 x 66.5 mm- Peso: 99.8 gramos- Color: Blanco- Bandas: 2.4 Ghz y 5 Ghz- Estándar de comunicación: IEEE802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b- Velocidad Transferencia Datos: 300 Mb/sg- Puerto Ethernet: 1 puerto ethernet 10/100/1000 mbps (rj45)- Consumo potencia: 10 w- 3 antenas externas- WPS- Botón de reinicio y encendido📦 CONTENIDO- Repetidor LAN- Manual de usuario📲 APP• TP-Link Tether💶 PRECIO• 4 de Octubre de 2020: 64,99€🟢 PROS* Buena cobertura* Aumenta su red inalámbrica* Fácil Configuración* Ubicación libre, sólo necesitas un enchufe* Wifi dual MIMO 3 × 3* Puerto Ethernet gigabyte* Indicador luminoso inteligente de señal para ayudar a encontrar la mejor ubicación* Botón WPS* App con buena gestión de tu red* Puerto Ethernet configurable como entrada/salida🔴 CONTRAS* Pierdes un enchufe de corriente* No viene con cable de red* No es compatible con Alexa* No compatible para red Mesh de la serie Deco📖 CONFIGURACIÓNPara la configuración puedes hacerlo de dos modos:1 – Mediante el botón WPS. Para ello debes presionar el botón WPS en el router y antes de 2 minutos, pulsar el botón que viene en el repetidor. Comenzará a papadear en modo RE y en cuando se reconozca la conexión, ya quedará configurado.2 – Mediante la App Tether. En esta ocasión, debes de conectarte a la red wifi del repetidor, que viene con contraseña. Una vez conectado, entras en la App y ya te permite configurarlo, seleccionando la red wifi que desees y a la que deberás introducir su contraseña. En un par de segundos, ya quedará configurado.📕 FUNCIONAMIENTOEste repetidor de TP-Link, puede funcionar en modo repetidor o en modo AP (punto de acceso)- REPETIDOR: El modo más usado, ya que te permite conectar tu dispositivo a la red wifi que desees y extender esa red wifi a zonas en donde no alcanza la red principal. Para ello, es recomendable situar el dispositivo en una zona alejada del router principal, pero con una señal de cobertura óptima.- MODO AP: En este modo, puedes crear una red wifi, pero en lugar de conectarse a la red principal por wifi, te conectas mediante LAN (cable de red) a través del puerto Ethernet que tiene el repetidor.Para ello debes tener una clavija de conexión que esté un poco lejos del router principal, ya que si lo conectas al lado, no te dará más distancia de la que te de el router general.📶 PUERTO ETHERNETLa clavija RJ 45 que tiene este repetidor puede funcionar de dos modos: como entrada y como salida.• ENTRADA : como ya comenté antes, funciona como entrada, cuando tengas el dispositivo configurado en modo AP, para ello necesita recibir la conexión a internet a través del puerto Ethernet.• SALIDA : Si configuras el dispositivo como repetidor, cogerá la conexión de internet a través de la comunicación wifi, en este caso, permitirá tener el puerto de Ethernet, configurado como salida, para que puedas dar servicio de internet a consolas, televisores, pc, portátil…8️⃣ VALORACIÓNAdquirí este dispositivo para enviar la señal de vídeo de un transmisor HDMI de una habitación a otra, hacia otro repetidor de este modelo.Antes de probar estos dispositivos, había probado con otros de gama más baja y la señal tenía cortes y no era nada fluida. Con este modelo, puedo tener una calidad de imagen como si tuviese la salida directa de mi decodificador de satélite.Hay que comentar que la velocidad que nos indica, es la suma de las dos bandas: 600 Mbps a 2,4 GHz y 1300 Mbps a 5 GHz, pero no quiere decir que conseguirás una velocidad de 1900Mbps en tus dispositivos móviles. Esta velocidad que indica, es la velocidad que de comunicación entre dispositivos.Con el router principal de casa tengo una velocidad de unos 600mbps y si conecto este modelo a la red wifi en modo repetidor, me anda en una velocidad de 150mbps. Esta prueba la hice estando el repetidor al lado del router principal, por lo que no conseguía una velocidad alta. Decepción.Hice otra prueba, poniendo el repetidor alejado del router principal y la recepción de señal era bastante buena y tenía una velocidad de más de 100mbps a más de 11 metros de distancia, sin elementos que interfirieran en la señal. Muy bien.Es un dispositivo con bonito diseño, compacto aunque con un tamaño mayor que otros modelos. Tiene una fácil configuración mediante de su App TetherSi dispones de un router con emparejamiento WPS, no necesitas tener la app instalada. En el emparejamiento WPS, te creará una nueva conexión wifi con el mismo nombre que la que está clonando, pero con la terminación “_EXT” al final de la misma. La contraseña será la misma que la wifi principal. Para cambiar el nombre de la wifi o la contraseña, necesitarías hacerlo desde la App.La App es bastante completa y tiene la opción de realizar diferentes configuraciones:* Configuración rápida de internet* Cambiar propiedades de la red extendida* Asistente de localización, para determinar la mejor ubicación del mismo* Opción de compartir wifi de modo rápido* Control del led indicador de funcionamiento, horas de funcionamiento, deshabilitar..* Ajustes de la configuración LAN* Ajustes de configuración del servidor DHCP* Cambiar potencia de la señal wifi. Nivel de potencia bajo, medio, alto.* Programación de apagado del repetidor.Este router viene con un puerto ethernet de 1000mbps, cosa que los modelos más económicos sólo traen hasta 100mbps y con un wifi dual de 2.4 y 5Ghz con tecnología Mimo, que en teoría nos permite una mayor cobertura y hace que pueda conectarse de forma simultánea con múltiples dispositivos de una manera más eficiente y con menos pérdidas.✅ CONCLUSIÓNUn repetidor con buenas prestaciones y una relación calidad/precio en la media del mercado.Cumple perfectamente con su función y en mi caso estoy satisfecho con su rendimiento..Es un repetidor fácil de configurar, ideal para todo el usuario medio sin grandes conocimientos de informática que sólo quiere aumentar la zona de cobertura wifi de su vivienda.👍 RECOMENDABLE.✳️ Espero que mi comentario ✍️ te haya podido servir de ayuda 😃
lopezje1 –
Excelente producto fácil de configurar al momento funciona de maravilla
Furkan –
1 yıldır bir sorun yok evin her yerinde çekiyor, hiç çekmeyen yerlerde bile kesintisiz internet var.
adrianxkern –
Rewelacyjny produkt, zmienil predkosc WiFi diametralnie, z 15mb/s na 75mb/s. Jestem bardzo zadowolony i polecam.