SONOFF Zigbee 3.0 USB Dongle Plus Gateway, Universal Wireless Zigbee Adapter with Antenna for Home Assistant, IoBroker(2 Pack)
$54.99
Related Products
Product description
SONOFF ZigBee 3.0 USB DONGLE PLUS
SONOFF Zigbee 3.0 USB Dongle is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don’t need to invest on the Zigbee hubs for different brands, all you need is a universal gateway – Dongle Plus!
Universal Zigbee 3.0 USB Gateway
Can use ZHA in Home Assistant or use Zigbee 2MQTT
Pre-flashed with Z-Stark firmware
Pre-flashed with Z-Stark 3.x.0 coordinator firmware, you can also flash router firmware to extend the network range
Zigbee 3.0 USB Dongle Plus
Base on TI CC2652P+CP2102(N), SMA interface external antenna,up to +20dBm output gain
Brand new housing design
Aluminum housing effectively reduces signal interference from peripherals
Wide Range of Supported Devices
Dongle can be used as a Zigbee 3.0 gateway in open-source automation platforms to manage various sub-devices from various brands or flash router firmware to extend the network range.
Support SONOFF Devices
The dongle plus has a wide range of supported devices, such as SONOFF S40ZBTPB Lite, SONOFF S31 Lite zb, SONOFF SNZB-01P, SONOFF SNZB-02P, SONOFF SNZB-03P, SONOFF SNZB-04P, SONOFF ZBMINIL2, SONOFF ZBMINIR2 , and various sub-devices from various brands or flash router firmware to extend the network range.
Add to Cart
Customer Reviews
4.4 out of 5 stars 535
4.3 out of 5 stars 1,087
—
3.6 out of 5 stars 448
3.5 out of 5 stars 419
3.8 out of 5 stars 206
Price
$12.99$12.99 $14.24$14.24
— no data
$16.14$16.14
— no data
— no data
Zigbee Protocol
ZigBee 3.0 ZigBee 3.0 ZigBee 3.0 ZigBee 3.0 ZigBee 3.0 ZigBee 3.0
Power supply
AC 120V 60Hz AC 100-240V 50/60Hz Include battery 3v(CR2450) Include battery: 3V (CR2450) Include battery: 3V (CR2450) Include battery: 3V (CR2032)
Compatible with Alexa?
✓
✓
no data
✓
✓
✓
Compatible with SmartThing?
✓
✓
no data
no data
no data
no data
Certified for Humans Device
no data
✓
no data
no data
no data
no data
Material
PC PC PC PC PC PC
Working environment
-10C-40C -10C-40C -10C-40C -10C-40C -10C-40C -10C-40C
Weight
91g 42g 25g 15.5g 19g 18g
Dimension
76x40x33mm 48x30x46mm 43x43x15mm 45x43x14mm 35x39x28mm 47x27x13.5mm
Pre-Flashed for Immediate Use: Comes pre-flashed with Z-Stack 3.x.0 coordinator firmware—ready to work out of the box.
Compatible Multi-Platform: Fully supports integration with ZHA in Home Assistant or use with Zigbee2MQTT for flexible smart home setups.
Powered by TI CC2652P + CP2102(N): Built on the reliable TI CC2652P chipset with CP2102(N) for stable communication and performance.
+20dBm Output Gain: Delivers strong transmission power with +20dBm output for extended Zigbee network coverage.
Easily Flashing: Use the Dongle Flasher Web tool or Add-on to flash other firmware faster.
13 reviews for SONOFF Zigbee 3.0 USB Dongle Plus Gateway, Universal Wireless Zigbee Adapter with Antenna for Home Assistant, IoBroker(2 Pack)
Add a review
$54.99
Ray –
Works well with Home Assistant + Synology / Docker setup
Good little USB coordinator that works everything I’ve tried so far…I am using one of these in 3000 sqft on 2 floors, using Sonoff smart plugs and a few Aeotec range extenders for network stability. It is stuck in a closet so antenna placement isn’t ideal, but nonetheless I was able to get a good mesh net going to control lights on both floors. Will be trying some smart blinds next…In case the headline means something to you, consider this one for good compatibility. It uses the Texas Instruments CC2652 chipset which is well supported in Linux systems, including Synology. So if you have a similar setup, consider this as your coordinator.I was able to pass this device through to Home Assistant in a Docker on DSM7.2 (using Portainer to compose the device layer). That lets the USB device show up inside of ZHA without doing anything additional. Haven’t tried MQTT but I assume it’s similar…
Amazonian –
Works great for adding zigbee for home automation!
added zigbee to my home assistant on a VM server on my synology NAS. Worked flawlessly! Took just a few minutes to setup.
Luiblonc –
A MUST HAVE!
“I couldn’t be happier with this purchase! The quality is outstanding, and it’s clear a lot of thought went into the design and functionality. This product has exceeded my expectations in every way, offering a perfect balance of performance, durability, and style.What truly sets this product apart is how well it delivers on its promises. It’s incredibly easy to use, and you can tell it’s built to last. Whether you’re looking for something reliable for everyday use or a high-performing option for special occasions, this is it.On top of all that, the value for the price is unbeatable. It feels like a premium product without the hefty price tag. If you’re on the fence about getting this, don’t hesitate—trust me, you won’t regret it. This is one of those rare finds that ticks every box!”
Robert –
Home Assistant Ready
Works great, works with Home Assistant easy to add.
Aaron –
Great addition to home assistant.
Super easy set up in home assistant. Works reliably and delay from the zigbee light switch to the zigbee bulbs has been acceptable. Good range.
b –
Got from Amazon Warehouse and it was broken – required my troubleshooting to fix – now work great!
I needed a Zigbee hub and this one is highly recommended for Home Assistant. You just plug it in and it is auto detected and installed.. or at least that’s what is supposed to happen.I ordered this in ‘ok’ condition from Amazon Warehouse to save about $7. The device came in a plain box and looked brand new. Plugged it in.. was recognized by Home Assistant, but when I tried to install it that kept failing. The logs showed some config settings weren’t being applied properly.Did some research online and followed the steps to flash the latest version of firmware onto this device. It was a major pain to do this, but I finally got the new firmware installed. Plugged this into my Home Assistant PC and it was detected, then the installation worked no problems. Yay! Was able to pair some Zigbee devices with no issues either. Has been working well for a couple of weeks.So why didn’t it work right away? I think someone may have flashed it as a Zigbee router instead of a repeater. Or maybe someone else tried to flash it, and it only partially worked, leaving the device in a broken state. I figure they tried to get this working, failed, and then gave up and returned it to Amazon. And at Amazon they look at it and see it looks OK so just resell it as working. I doubt Amazon was able to test this before reselling it. If so they would have known it was broken…I’m glad I was able to fix it, but was it worth the $7 in savings? No way! It took me about 3 hours of hacking/troubleshooting to get this working. I was very pleased to get it fixed, but next time if it doesn’t work right away, I will return it and buy a brand-new one, which I’m confident would work right out of the box. The only reason I didn’t return this was because I really wanted to get this set up during the weekend and it would have been another 2 day wait to have Amazon ship me a new one.Lesson learned!
Kazem –
No frills method for controlling your zigbee devices
Connected to my HPE DL380 G9 server running unraid with a home assistant vm in my basement. It was detected after passing through the usb device to the HA VM. Works well with the Devices I need it for. Next up is a zwave adapter!
Jack8523394 –
Works out of the box on a linux server running zigbee2mqtt in docker.
Use with a standalone node red server(using node-red-contrib-zigbee2mqtt), and zigbee2mqtt in a docker container on my Linux server with the usb dongle plugged into it. Works great for my single temp/humidity sensor from third-reality. I will be adding more devices o course, just needed to make sure this product works and it does! Also the firmware it came with did not need to be changed for my setup.
G Watson –
I got this to create a Zigbee network in Home Assistant after finding that many of the devices and sensors that I wanted to use made use of this protocol. So far, I have only positive things to say. It was detected right away after rebooting my Home Assistant host, and configuring the first few Zigbee devices was a painless experience, including Ikea globes and remotes too. It is a bulky case, so if you are plugging it directly into your machine, you might find some clearance issues, but a small extension can fix that easily. I would definitely recommend this device based on my own experiences so far.
Josep Martinez –
Hub Zigbee para Home Assistant , conectar , configurar y listo. Para los amantes de la domotica sabemos que Sonoff no defrauda, y a buen precio.
Paul A. –
Flawless functionality in HAOS. Pass through the usb device in proxmox to the Vm if you’re using that kind of setup. Instead of ZHA, Use MQTT and you will not be disappointed. No need to flash firmware but if you want to, use the python method.
Sai Gokula Krishnan –
Works!
Edher Nuno –
Compré un par, uno simplemente lo conecté a la raspberry con home assistant (ZHA) y funcionó sin problemas. Al otro le cambié al firmware (con python) para usarlo como router, de nuevo, sin problemas.