Mounting Dream TV Wall Mount for Most 37-75 Inch TVs, Universal Tilt TV Mount Fit 16″, 18″, 24″ Stud with Loading Capacity 132lbs, Max Vesa 600 x 400mm, Low Profile Flat Wall Mount TV Bracket

Strong, well-built mount with straightforward install
This mount feels very solid and held my 55″ securely. Instructions were clear, hardware was well organized, and leveling was easy.Pros: sturdy, easy installation, good instructionsCons: heavier TVs require two people to mountBottom line: Excellent wall mount if you want strength and reliability.

Value + Price. Gets the job done. But…
When you’re looking for a simple, well-priced mount option, and one that seems to accommodate all stud-spacing situations, your next parameter to consider may be the actual stud-spacing situation and the center of the wall (or center location you want the TV mounted). You want a mount that accomodates various stud-spacing. That’s why I purchased this one (16/18/24 ) with 16″ center-to-center being the most common. You may want to locate your studs first, before ordering, to try to determine if this mount will work for you. (I’m attaching a photo of the wall-mount bracket paper template that is included with this unit in case it helps anyone. I’d like to have all these things prior to ordering actually.)The dimensions of the plate are:25.5″ width9″ heightCenter bracket (no drilling area) is 2.5″ wide, then the slot pattern starts.The lateral lag bolt locations are 1-3/8″ slots with 5/8″ between the slots spacing.While this bracket accomodates for various stud spacing (16/18/24), I hadn’t considered that there may be any oddities in the stud-spacing in shorter walls at the vertical center (if you want your TV “centered” in a 12-16′ wall). I figured this mount should handle with whatever stud situation, and allow us to horizontally shift either the bracket mount or the TV. This wasn’t a correct assumption.Our wall is approximately 14′ wide. After scanning with a new stud-sensor (which didn’t seem reliable/accurate anyway), it indicated centered wall studs spaced about 5″ apart in the middle of the wall (turned out to be false). Its stressful that this bracket has a 2.5″ center plate which precludes you from drilling any holes where the center bracket is located, and may possibly screw up your spacing for the next stud…According to the stud-sensor, the slot situation for the lag bolts locations in studs was going to be very tight. The stud-sensor gave one positive reading and one false reading for a ghost stud. It gave the same reading exactly, approximately 6″ below the top holes. (If you’re trying to get these lag bolts into a stud, then you will likely need a stud-sensor to do this job-but let’s hope it’s more accurate than the “top of the line” model I bought).If you have a wall-mount bracket that is 25.5″ width, and you are supposed to have the common 16″ stud-spacing, and a shorter wall (like 12-14′) upon which you want the TV centered, you actually don’t have a lot of room for stud/lag-bolt error and the 25.5″ plate doesn’t actually give a lot of leeway for shift either…I don’t want to give the bracket a low rating because it functions as it should, but I do want to say that we had no choice but to end up with 2 stud-mounted lag bolts and 2 drywall-mounted lag bolts (which should’ve been anchors. I’m not worried about it as the TV is light and the weight is centered.) But, this whole process took longer than it should’ve. I didn’t feel satisfied that the entirely stud-mounted situation hadn’t been achieved (for which the stud-sensor is to blame, but, also there just isn’t actually alot of room for error with the wall-mount panel width versus the actual stud locations).

Solid mount, easy to install
Used this to mount a 48 inch LG B5 in the bedroom. It worked perfectly. Easy to install, but I would recommend a proper level rather than using the one included. It had the just the right amount of down tilt to compensate for watching TV from our bed.

I used this for our bedroom TV, and it does the job as expected. No complains, no signs of problems with durability, easy to mount, good instructions and all the accessories included.

This was dead easy to install. I was a bit concerned at first that it wasn’t a one piece design but once assembled it was very very sturdy.There are some interesting additions to the dressing. To lock in place you have pull tabs to lock and unlock. Time will tell is they last but out doors make locking it easier.It’s also comes with all of the bolts you need to mount it and to mound the TV with the Veda mounts