Minoston Zwave Plug Energy Monitor, 800 Series Zwave Outlet, Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible (MP21ZP)
$30.99
Related Products
From the brand
Swipe right to see more.
Minoston Smart Life is a dynamic and innovative brand dedicated to transforming the home into an intelligent and connected living space.
Minoston is committed to user experience-centered design and offers a range of smart home solutions aimed at enhancing comfort, safety and energy efficiency. We envision the seamless integration of future homes with intelligent technologies, making daily life simpler, safer and more enjoyable.
Minoston Best Seller
New Release
Matter Smart Plug
WiFi Outdoor Plug
Z-Wave Smart Plug&Dimmer Plug
Z-Wave Outdoor Plug
Countdown Timer Switch
Outdoor Timer
Minoston Smart Home
Product Dimensions : 1.14 x 1.89 x 1.89 inches; 2.08 ounces
Item model number : MP21ZP (VER 8.0)
Date First Available : October 12, 2023
[Reliabble Zwave Outlet] Built-in an 800 series chip. This zwave smart plug has better signal coverage than ever, and faster communication, with S2 authenticated security and SmartStart for effortless pairing. Extend the wireless coverage up to 1300ft if your hub supports Long Range
[Zwave Plug Energy Monitor] Supports check the power or energy usage on the app. It helps to analyze electricity consumption so that you can understand the structure of your electricity consumption and reduce it
[Easy to Setup and High Security] SmartStart pre-programmed z wave plug only needs to be scanned and press the button 3 times to add devices (Less than 1 min). The high security of S2 ensures your privacy and is not easily attacked by hackers
[Wireless and Voice Control] Connect the z wave outlet to the z-wave hub (sold separately) and then you can use an app to remotely control it through the z-wave controller. Compatible with Alexa and Google Assistant(hub required). Voice control it by saying “Adjust light to 75% brightness”
[Timer Schedule] Support timer and schedule setting. Allow zwave plug energy monitoring to be turned on or off automatically, or to view energy usage at a specific time
[Require a Z-Wave Hub (sold separately)] This zwave outlet is compatible with SmartThings, Hubitat, Vera, Wink, Z-Box Hub, Fibaro, Ring, 2GIG, HomeSeer, ect.CANNOT connect directly with ECHO PLUS
13 reviews for Minoston Zwave Plug Energy Monitor, 800 Series Zwave Outlet, Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible (MP21ZP)
Add a review
$30.99
B. Emerson –
great product
I’m been using these to control my xmas lights for years, outside in the cold New England winters. Work great
D. –
One works great. The second is doa. Support resolved it.
Update: customer service helped me resolve this issue… I’m happy with the support. No product is perfect, and you get 5 stars from me when you treat the customer right.Unfortunately, I only tested one of the two I bought. It worked great, and does exactly what I want. The second one is dead. No LED, no activity, no power. It is sadly later than the return window, and Amazon’s site gives me no options when I say “get support”. I’d hoped to ask for troubleshooting ideas, and how to get warranty support. Neither option seems to exist.
ItsMeReally –
Worked perfect first try
Paired with Home Assistant easily and set up a notification for when my front load washer finishes. You should realize this is Z-Wave, so you need appropriate hub or network for this to do anything for you. Specs say around 1800 or so watts supported. My washer never goes over 700 so no risk I’m pushing the limits.
Cyndi –
Work well and easy to add to Smartthing Hub
I have several of these now and just bought two Dimmer capable ones. I didn’t know I bought the dimmer model unit I added them to my Smartthings Hub.One of the dimmer capable units is not working right. When I set it to 100% brightness the light turns off and when I set the brightness to high say 85% percent the light flashes on and off. I think the unit is faulty. I need to find a way to get it replaced. I have tried several different LED bulbs in the lamp and it always acts the same way. The other unit works fine with no issues. I have several of the non-dimmer units with no issues at all. I find these Minoston units to be one of the easiest to joint my Smartthings network.
Robert Stewart –
Dead after 2 months
The mini smart plug was easy to setup and connect to my zwave hub. It worked well until last week when it suddenly went dead. I tired several outlets and confirmed there was power to the outlet. I reviewed the manual but it’s just dead. No led light at all. I contacted Amazon and was asked to send a support request to the seller which I did. The Amazon rep told me the seller is required to respond within 48 hours and that if they couldn’t help he assured me that they won’t leave me hanging. He also assured me he would call or email me to make sure this was resolved. I got no response from the seller and no follow up from Amazon. I contacted Amazon support after 4 days and was quickly told “it’s been 2 months and we can’t help you”. I confirmed that rep could see the message j was sent by the first rep but was again told there was nothing they could do. No help from seller. No help from Amazon. Device died after 2 months for no apparent reason.
MartianRabbit –
Compact single outlet/repeater zwave+
Excellent zwave outlet / Repeater. These are zwave plus devices for the highest security. Compact and not obtrusive.
Eric Work –
Work with SmartThings
Very easy to add to the hub by scanning the QR code, plugging in the device, and tapping the button 3 times. I used the suggested SmartThings driver, but I don’t think it’s actually needed. I didn’t notice any differences, but I also didn’t use the default driver for very long before switching. I purchased a second device since I had great success with the first one.
Mike –
If you need a Z Wave switch to report energy usage, this is the one!
I had a couple of false starts by getting products that were only switches and didn’t report current usage in the Z Wave reports. I needed a switch that reported current so that I could use my Home Assistant automation to turn the switch off when current dropped below a threshold so that battery chargers don’t overcharge the batteries. I contacted Minoston and they gave me 2 products that have energy monitoring and I chose this mini plug and they work perfectly. They were very easy to include securely in my Z Wave network. I will definitely be buying more.
Engel –
I have been using this zwave outlet device for a few days only but honestly it works flawlessly. It connected to my HA server using aeotec stick on the first attempt.The outlet is on a different floor, on diagonal opposite direction and it is still getting the signal quite well.I just ordered another one to use as repeater for the rest of the basement!
CReyes –
Lo compre para controlar las luces de navidad. Incluirlo en un controlador Zwave Vera fue muy facil y rapido.Solo el precio me parecio algo elevado para un producto tan sencillo.
Thomas Bernard –
Works as expected. Easy integration with Samsung SmartThings. Very happy with this
L Au –
I used this with my Habitat Z-Wave controller. It detects and setups within seconds without any issue. It works very well as well. I give only 4 stars because of 2 reasons: 1) My controller detects it as “Zooz Double Plug”, but it is actually a single plug. It doesn’t really do any harm. 2) There is a slight 2 seconds delay between you press the button to the actual device turn on.
joseph fardella –
Will not connect to my hub. Waste of money